Proxmark3 512M RFID Card Reader NFC 5.0 Smart Chip Copier Kit

Proxmark3 512M RFID Card Reader, IC/ID Key Writer & NFC 5.0 Smart Chip Copier Programmer Kit

Take your RFID research and access card management to the next level with the upgraded Proxmark3 512M — a professional-grade RFID reader, writer, and duplicator kit supporting both low-frequency (125 kHz) and high-frequency (13.56 MHz) card protocols. Whether you're a security researcher, IT professional, or hobbyist, this powerful kit delivers stable data analysis, fast card recognition, and broad firmware compatibility in a compact, portable form factor.

Made in Mainland China.

Key Features & Upgrades Over PM3 RD V2.0

• 512M Processor Upgrade: Upgraded from AT91SAM7S256 to AT91SAM7S512 for enhanced performance and memory capacity.
• Dual USB Ports: One port for mobile power supply; the second enables offline monitoring flexibility.
• Built-In High-Frequency Antenna: Eliminates blind spots and reads entire card data without interruption.
• Improved Low-Frequency Antenna: Enhanced signal-to-noise ratio for faster, more accurate card recognition — mounted externally for flexible positioning.
• Stable Data Analysis: Consistently low error rate for reliable read/write operations.
• No External Antenna Interface Needed: Simplified, streamlined design reduces potential connection points.
• No Built-In Lithium Battery: Powered via USB/power bank in offline mode — lightweight and travel-friendly.
• Full Firmware Compatibility: Compatible with all official Proxmark3 firmware versions. Use via command line or the official Proxmark Tool .exe application.
• CE Certified: Meets international CE quality standards.

Technical Specifications

• Working Voltage: 3.5 – 5.5V
• Working Current: 50 – 130 mA
• Dimensions: 54 mm × 86.6 mm
• Thickness: 6.2 mm (thinnest) / 9.8 mm (with screws) / 15.8 mm (with LF antenna attached)
• LF Antenna: 30.41 V @ 125.00 kHz | 22.01 V @ 134.00 kHz
• HF Antenna: 28.43 V @ 13.56 MHz

Supported Card Operations

High-Frequency Card Mode

• Read standard M1 S50 and ISO 14443A Type B cards
• PRNG security analysis (darkside attack)
• Full-sector key parsing using built-in MFOC algorithm

Simulation Card Mode (HF)

• Simulate Mifare S50, Ultralight, and transparent card series for user identification
• Full M1 S50 sector data simulation
• Simulate M1 S50 protection board to derive key calculation data

Silent (Sniff) Mode (HF)

• Passively analyze communication between M1 S50 cards and readers
• Full ISO 14443A Type B passive communication support

Low-Frequency Card Mode

• Read low-frequency cards: ID, HID, T55xx, Indala, and more
• Write ID/HID/Indala data to T5577 cards
• Simulate ID/HID card types with ASK/FSK/PSK modulation schemes
• Passive LF data sniffing between card and reader

What's Included

• 1 × Proxmark3 512M Main Board (with built-in HF antenna)
• 1 × Replaceable UID Card
• 1 × Interchangeable Key Chain UID Fob
• 1 × T5577 Card

Note: This device supports copying of most standard cards. It does not support live-card or specially encrypted proprietary card reading and writing.

You May Also Like

• 10pcs 2-Pin Spring Wire Connectors – Quick Splice Lock Terminals
• 12pcs 16mm Momentary Push Button Switch 1NO Metal 2-Pin Self-Reset
• 10pcs Durable Gold Blade Nut Metal Universal Trimmer Accessories Anti-Loosening

Learn more: OSHA guidance on hand and power tools

Frequently Asked Questions

Q: What RFID card frequencies does the Proxmark3 512M support?

A: The Proxmark3 512M supports both low-frequency (125 kHz and 134 kHz) and high-frequency (13.56 MHz) RFID cards. This includes common card types such as ID, HID, T55xx, Indala (LF), as well as Mifare S50, ISO 14443A, and NFC 5.0-compatible HF cards.

Q: Does the Proxmark3 512M work with all official firmware versions?

A: Yes, the Proxmark3 512M is fully compatible with all official Proxmark3 firmware versions. You can flash and use any version via the official command-line interface or the Proxmark Tool .exe software, depending on your preference.

Q: Does this RFID programmer kit require a battery?

A: No internal lithium battery is required. The Proxmark3 512M is powered through its USB port. In offline mode, you can conveniently use a standard USB power bank, making it lightweight and easy to carry wherever you need it.

Q: What cards and fobs are included in the kit?

A: The kit includes one Proxmark3 512M main board with built-in HF antenna, one replaceable UID card, one interchangeable key chain UID fob, and one T5577 card — everything you need to get started with RFID reading, writing, and duplication.

Production & Packaging Notice

To maintain high stock availability and fast shipping times, our items are sourced from multiple verified manufacturing facilities. While the core quality, materials, and product specifications remain identical, you may notice slight variations in the packaging design, manufacturing origin, or the wording of the printed instructions.